Loading stapes into your staple gun is a quick process.
The Bostitch H2B is a manual staple gun used for anything from holding down canvas for matte boards to attaching carpet to your floor. Loading the stapler is similar to loading any other staple gun and only requires a moment or two before the new row of staples are locked and ready for use.
Instructions
1. Pull down on the metal release located on the bottom of the H2B staple gun. This releases the staple compartment and any remaining stapes in the gun. It is not recommended by the manufacturer to load the stapler if there are still stapes inside as this may lead to jamming.
2. Insert the full row of stapes with the points facing frontward. The entire row fits into the staple chamber without much effort.
3. Push the chamber back into the staple gun and it locks into place.
4. Hold down the head of the stapler against the surface you want to puncture, then squeeze the trigger. This forces the first staple into the desired area.
