Enamel spray paint is a quick-drying spray paint designed for use on wood, metal, wrought iron, glass, plaster and ceramic. It has a durable, hard finish that is moisture resistant and glossy. The pigment and resins are pre-mixed in a closed canister, but must be mixed thoroughly for a proper spray from the spray nozzle. If the paint is not mixed properly before use, the color may not be consistent or the finish may be blemished.
Instructions
1. Hold the can in your hand and shake up and down until you hear the metal balls in the can begin to rattle.
2. Swirl the balls in the bottom of the can to lift any pigments stuck there and begin to shake up and down again.
3. Shake the can vigorously for two minutes.
4. Remove the cap and hold the can horizontally ten to 12 inches above the surface of the scrap cardboard or wood. Press the nozzle to test the spray. If the spray is consistent, the paint is well-mixed.
5. Spray your project, shaking the can for ten seconds after each minute of use.
